#575 Right Angle Drive  Makes hard to reach areas accessible. Fits models 400, 398, 395, 300, 285, 275, 800, 780
 

#9911 Tungsten Carbide Cutter has a 1/8" shank. Excellent pick for enlarging water pickups or general grinding of any material

#9909 Tungsten Carbide Cutter has a 1/8" shank. Another good pick for enlarging pickups and general of any material.

#190 High Speed Steel Ball  Cutter  has a 1/8" shank and a 3/32 ball. Also good for enlarging pickups.

EZ402  EZ Lock Mandrel
 

EZ456 EZ Lock Cut off wheels  5 wheels 1.5" dia

EZ Lock Detail Abrasive Brush 36 Grit Coarse  Excellent for removing mold flashing from prop hubs. Great for detail cleaning and light sanding. Use on metal, wood, glass, aluminum and plastics. For use with the EZ402 EZ Lock Mandrel or Standard 402 Mandrel. 1 inch diameter.  $8.20

EZ Lock Detail Abrasive Brush 120 Grit Medium  Excellent for removing mold flashing from prop hubs. Great for detail cleaning and light sanding. Use on metal, wood, glass, aluminum and plastics. For use with the EZ402 EZ Lock Mandrel or Standard 402 Mandrel. 1 inch diameter.  $8.20

EZ Lock Detail Abrasive Brush 220 Grit Fine  Great for detail cleaning and light sanding. Use on metal, wood, glass, aluminum and plastics. For use with the EZ402 EZ Lock Mandrel or Standard 402 Mandrel.
1 inch diameter.  $8.20

Flapwheel 120 Grit 3/16  For use on metals, wood, rubber, or plastic. Use as a finishing sander to grind or polish flat or contoured surfaces. 3/16 inch thick, 1 1/8 inch diameter, 1/8 inch shank.  $7.00

Flapwheel 80 Grit 3/8  For use on metals, wood, rubber, or plastic. Use as a finishing sander to grind or polish flat or contoured surfaces. 3/8 inch thick, 1/8 inch shank.  $7.00

Flapwheel 120 Grit 3/8  For use on metals, wood, rubber, or plastic. Use as a finishing sander to grind or polish flat or contoured surfaces. 3/8 inch thick, 1/8 inch shank.  $7.00

Dremel 300 Series Variable Speed Rotary Tool Kit   Variable speed from 5,000 to 35,000 RPM. "Dove-tail" feature for Dremel-exclusive attachments. On-board storage for collet wrench. Replaceable motor brushes. Four year limited warranty through manufacturer.  $85.00
Includes:
300 Series Variable Speed Rotary Tool
Circle Cutter and Straight Edge Guide
Plastic Storage Case
#191 High Speed Cutter
#402 Mandrel
#407 Coarse 1/2" Sanding Drum
#414 Two Small Felt Wheels
#401 Mandrel
#403 Bristle Brush
#420 Two Heavy Duty Emery Cut-Off Wheels
#421 Polishing Compound
#422 Cone Polishing Tip
#426 1-1/4" Fiberglass-Reinforced Cut-Off Wheel
#428 Carbon Steel Brush
#429 Large Felt Wheel
#430 Coarse Sanding Drum
#432 1/2" 120 Grit Sanding Band
#438 1/4" 120 Grit Sanding Band
#442 Carbon Steel Brush
#540 1-1/4" Cut-Off Wheel
#561 Multi Purpose Cutting Bit
#932 Aluminum Oxide Grinding Stone
#952 Aluminum Oxide Grinding Stone
#8193 5/8" Aluminum Oxide Grinding Stone
#85422 Silicon Carbide Grinding Stone

#402  Disk Mandrel  Used to hold sanding disks and cutoff wheels

#420 Heavy Duty Cutoff Wheels     20pcs

#411 Coarse Sanding Disc    36 pcs  3/4dia   180 grit
 

#401 Polishing Mandrel  1/8 shank used to hold polishing discs and wheels

#414 Felt Polishing Wheel    1/2dia   6pcs

#429 Felt Polishing Wheel   1"dia 

#421 Polishing Compound

Back to top of page