Traxxas Water Proof Receiver Box  An excellent way to protect your radios receiver. Small, light weight, space saver. Comes with water proof grease but I would use silicone for a perfect seal. Only $11.25 and worth every penny.
  

Traxxas #2056 Waterproof High Torque Servo  with J style connector.  $28.00
The first fully waterproof servo on the market. 80 oz/in of torque
Length  2.16" (55mm)
Height  1.69" (43mm)
Weight 1.58oz (45g)
Torque 80 oz-in
Speed  0.23 sec @ 60°

3/16 Aeromarine Welded Flex Cables   .187 (3/16)  flex cable with 3/16 ground shaft. Excellent quality and very strong. Very well balanced and true running. Has a 10-32 thread.  Use #1600 for the FE 30.

Sizes

3/16 x 18 #1600 $18.00 3/16 x 24 #1602 $20.00 3/16 x 30 #1604 $23.00

Prop Nuts  Self locking prop nuts. Commonly called clinch or zuber nuts. The best there is. Only 60 cents each.
Has a 10-32 thread for 3/16 shafts.

Octura 3/16 Small Dog  These are for a 3/16 shaft and have a 5/16 outside diameter.  $3.00 ea

Aquacraft Servo Mount   AQUB8781  Nice compact light weight and strong. Lay down type.   $13.00

LG Bore Water Outlet  Machined aluminum with stainless nut and rubber washer. Fits 3mm or 4mm tubing.
 .135 ID, 1/4 thread  Made in USA  $2.90
 

4mm x 7mm Silicone Water Line  Has an inside diameter of 4mm (5/32") and outside dia of 7mm (.276")
Sold in 3 foot lengths for $2.00

JR Heavy Servo Extension 6"  Made from heavy 22awg wire.  $1.50

Octura 5mm x 3/16 Collet  This is a good 2 pc replacement that fits a 5mm motor shaft and 3/16 cable.  $9.95ea

Banjo Fittings   Low profile, fully adjustable in any direction, Nickel plated, 10 x 32 thread.  $5.00 each
 

Transom Fitting    Large 1/8 Inside diameter. Made from Aluminum. Makes for an attractive functional install of cooling lines.

5.5MM Bullet Connectors  A must have for hi amp applications and an excellent upgrade from Deans type. Perfect for 10 Gauge wire.  $1.00 per pair, one male and one female.

3M Velcro.  This is industrial strength 3M Velcro brand velcro with the strongest adhesive back made (blue label). Very strong. This is a great way to keep the lipos or batts in place. Once you know where you want your batts just stick the hook side to your hull and the loop side to your lipos and your good to go. They will not move. Comes in 1 or 2 inch wide. Sold by the foot. You can cut the 2" in half and have enough for 2 pairs of lipos.
 

Sizes x 1 foot

1" hook & loop $1.65 1" loop only (lipo side) $0.85 2" hook & loop $2.75 2" loop only (lipo side) $1.40

K&S Brass Tubing  Tubing is sized by outside diameter and is .014 wall thickness. Sold in 1 foot lengths.

Sizes

1/8 od #127 $1.00 5/32 od #128 $1.15 3/16 od #129 $1.30 7/32 od #130 $1.40 1/4 od #131 $1.60 9/32 od #132 $1.75 5/16 od #133 $1.95 11/32 od #134 $2.15 3/8 od #135 $2.25 1/2 od #139 $2.80

Dubro 4-40 Threaded Rod #144  .093 diameter rod 12 inches long, threaded 4-40 on one end. $1.00ea

Dubro Swivel Connector 4-40 Great way to connect pushrod to servo. Pivots for no binding. Adjustable on the rod with a set screw. Works on 4-40 and smaller rod.  $2.20 per pair

Great Planes 4-40 Threaded Clevis Perfect for attaching rod to servo horns. Comes in pack of 2.   $1.50 per pack

AquaCraft Radio Box Seal Boot    Fits 2-56 or 4-40 rods.  Works perfect over 3/8 brass on aluminum tubing.   $2.70 per pair

Octura M445  Beryllium Copper prop     Diameter of 45mm (1.77")  x 1.4 =  Total Pitch of 63mm (2.478")    Fits 3/16 shaft     $13.00ea
 

FE-30 Build Package #1  Includes 3/16x3/16 flex cable, prop nut, Octura 3/16 drive dog, Large water outlet, 4mm silicone line, JR 6" servo extension, Octura 5mm x 3/16 collet,  2 banjo fittings, high flow transom fitting, 5pcs 5.5 bullet connectors, 2 feet 1 inch velcro, k&s 1/4 brass stuffing tube, Dubro 4-40 rod, Dubro Swivel, Great planes 4-40 clevis, Aquacraft boots.  $65.00

Back to Top of Page