Kintec Racing Prop Balancer  This is without question the best prop balancer on the market. Can be used on any surface and does not need to be leveled. Will even work if you hold it in your hand. All other balancers that use cones need balanced. Why buy a balancer that needs balanced? Beautiful machined aluminum brackets with hardened tool steel shafts for a no wear no bend unit.                             Another quality Kintec Racing product. Made in USA  $35.00

 

Prop Balancer & shafts

3/16 Balancer $35.00 1/8 & 3/16 Balancer $40.00 1/4 Balancer $45.00 3/16 & 1/4 Balancer $50.00 1/8, 3/16, 1/4 Balancer $55.00 1/8 shaft only $7.00 3/16 shaft only $9.00

Grim Racer Prop Balancer  This is a great entry level prop balancer  that includes shafts for 1/8, 3/16 and 1/4 props.   $30.00

Horracing Prop Balancer  Comes complete with the following shafts. 2mm, 3mm, 4mm, 4mm threaded insert.  1/8, 3/16, 1/4
Can be used on any surface. $19.00ea
 

Bullet Nuts    Made from solid brass or stainless steel. Much stronger then aluminum and will not flake and rust like the plated ones. These can be polished to a super high luster. Photographed raw. This makes the boat look so much better and faster.
Another quality Kintec Racing product.   Made in USA.
      

Sizes & Alloys

4mm Brass $3.45 4mm Stainless $4.45 10-32 Brass $3.45 10-32 Stainless $4.45 1/4-28 Brass $4.45 1/4-28 Stainless $5.45

Carbon Fiber   2 blade props for 3/16 shaft and have a pitch of 1.4mm. No need to balance or sharpen these. An affordable option.

Sizes

38mm x 1.4 $3.50 40mm x 1.4 $3.50 45mm x 1.4 $3.50 47mm x 1.4 $3.50

GrimRacer Props
High performance Copper-Beryllium-Titanium.  These props are impressive. Very well made with no flashing and tumbled to a bright finish. If you don't know how to balance a prop these are as close as you can get.

Aquacraft 3 blade 40mm.  Part# AQUB7888. This is the stock supervee27 electric prop that comes with your boat. A good sport running prop and not to hard on your wallet. Sold in pairs for $16.99

Aquacraft 37mm  This is the stock sv27 nitro prop. A great prop for the ammo motor. Sold in pairs. $17.00

Grimracer  36 X 55    Aquacraft # AQUB9700 2 blade  Aquacraft recommended upgrade for Miss Vegas.
Diameter 36mm - pitch 55mm.  Fits 1/8 shaft.    Made in USA
 

Grimracer  L38 x 55  Aquacraft# AQUB9755  2 Blade High Lift prop.  Another Aquacraft recommended upgrade for the UL-1.
Diameter 38mm - pitch 55mm.  Fits 3/16 shaft.  Made in USA

Grimracer L38 x 63  Aquacraft# AQUB9758  2 blade High Lift prop. Diameter 38mm - pitch 63mm.  Fits 3/16 shaft.  Made in USA

GrimRacer 40 X 52/3  Aquacraft# AQUB9720   3Blade prop. Diameter of 40mm - pitch 52mm. Fits 3/16 shaft.  Very close in size and pitch as the octura 440/3.      Made in USA 
 

GrimRacer  40 x 53    Aquacraft #AQUB9715    2 blade.       Diameter of 40mm and a pitch of 53mm.     Fits 3/16 shaft.    Made in USA
 

GrimRacer  L40 x 57 3 blade    Aquacraft #AQUB9760 This is Grimracers first pick for an upgrade on the UL-1.
Diameter 40mm - pitch 57mm.        Fits 3/16 shaft.    Made in USA
 

GrimRacer 42-55  Aquacraft #AQUB9725    This is the prop Grim Racer recommends for top end speed on a SV27. According to the Aquacraft chart it is the replacement for a Prather 230 but it has a radius on the tip where the Prather is more pointed.
Diameter 42mm - pitch 55mm.   Fits 3/16 shaft.   Made in USA
 

GrimRacer L42 X 66  #AQUB9763 Diameter of 42mm and a pitch of 66mm fits 3/16 shaft.  Made in USA.
 

GrimRacer L44 X 66   #AQUB9765   High Lift prop.   Diameter of 44mm and pitch of 66mm.   Fits 3/16 shaft.  Made in USA.
  

GrimRacer L45 X 68 Lifter  Diameter of 45mm (1.772) and a total pitch of 68mm (2.677).
 

Prather 215    Has a diameter of 1.6" (40.6mm) and a pith of 2.5"   These props are very well made with no mold flashing which makes for easy balancing.    Fits a 3/16 shaft.    Made in USA
 

Alloy

B-215 Beryllium Copper $14.95 S-215 Stainless Steel $15.95

Prather 220   Has  diameter of 1.72" (43.7mm) and a pitch of 2.6"   Very well made.   Fits a 3/16 shaft.    Made in USA
 

Alloy

B-220 Beryllium Copper $14.95 S-220 Stainless Steel $15.95

Prather 225         Diameter of 1.84" (46.7mm) and a pitch of 2.8"   Fits a 3/16 shaft.    Made in USA   

Alloy

B-225 Beryllium Copper $15.00 S-225 Stainless Steel $15.95 Option 3 $15.00

Prather 230   Diameter of 1.9" (48.3mm) and a pitch of 3.0"   Fits a 3/16 shaft.   Made in USA 

Alloy

B-230 Beryllium Copper $15.00 S-230 Stainless Steel $16.95 Option 3 $15.00

Prather 235       Diameter of 2.0" (50.8mm) and a pitch of 3.2"   Fits a 3/16 shaft.   Made in USA 

Alloy

B-235 Beryllium Copper $15.95 S-235 Stainless Steel $16.95 Option 3 $16.95

Prather 240   Diameter of 2.12" (53.8mm) and a pitch of 3.3"    Fits a 3/16 shaft.    Made in USA  

Alloy

B-240 Beryllium Copper $15.95 S-240 Stainless Steel $16.95 Option 3 $15.95

Prather 260   Diameter of 2.52" (64mm) and a pitch of 3.9"  Fits a 3/16 shaft.  Made in USA
 

Alloy

B-260 $16.00 S-260 $17.00

Prather B-265   Diameter of 2.61" (66.3mm) and a pitch of 4.0"  Fits 3/16 shaft.    Made in USA   $17.00
 

Prather S-280   Diameter of 3.10" (78.74mm) and a pitch of 4.5" fits a 1/4 shaft comes with a 3/16 reducing sleeve.  Made in USA   $19.00

Octura

Octura Y535  Beryllium Copper prop. Diameter of 35mm (1.38") x 1.54 = Total pitch is 53.9mm (2.125")  Fits 1/8 shaft.
This is a great upgrade for Miss Vegas or Miss Elam.    $9.75ea
 

Octura X432  Beryllium Copper prop.   Diameter of 32mm (1.26')  x 1.4 = Total Pitch of 44.8mm (1.76")   Fits 1/8 Shaft    $9.75ea
 

Octura X437/3  Beryllium Copper prop.  Diameter of 37mm (1.48") x 1.4 = total pitch is 51.8mm (2.07")    Fits 3/16 shaft.     14.50ea
 

Octura X637   Beryllium Copper prop.   Diameter 37mm (1.48") x 1.6 = Total pitch 59.2mm (2.368")    Fits 3/16 shaft  $13.00

Octura X438  Beryllium Copper  Diameter of 38mm (1.50") x 1.4 = Total pitch of 53.2mm (2.10")   Fits 3/16 shaft.   $13.00
 

Octura M440  Beryllium Copper prop  Diameter 40mm (1.57")  x 1.4 =  Total pitch 56mm (2.198")  Fits 3/16 shaft  $13.00

Octura X440  Beryllium Copper  Diameter of 40mm (1.57")  x 1.4 = Total Pitch of 56mm (2.198")  Fits 3/16 shaft   $13.00
 

Octura X640  Beryllium Copper prop.  Diameter of 40mm (1.57") x 1.6 = Total pitch 64mm (2.512")  Fits 3/16 shaft   $13.00

Octura X440/3   3 blade Beryllium Copper prop.  Diameter 40mm (1.57") x 1.4 = Total Pitch 56mm (2.198)  Fits 3/16 shaft.

Octura X442  Beryllium Copper 2 blade.  Diameter of 42mm (1.65")  x 1.4 =  total pitch of 58.8mm (2.31")  Fits 3/16 shaft  $13.00ea
 

Octura X642  Beryllium Copper prop.  Diameter of 42mm (1.65") x 1.6 =  Total pitch 67mm (2.64")  Fits 3/16 shaft $13.00ea
 

Octura M445  Beryllium Copper prop     Diameter of 45mm (1.77")  x 1.4 =  Total Pitch of 63mm (2.478")    Fits 3/16 shaft     $13.00ea
 

Octura X445  Beryllium Copper Prop  Diameter 45mm (1.77")  x 1.4 =  Total pitch 63mm (2.478")    Fits 3/16 shaft    $13.00
 

Octura M645  Beryllium Copper prop. Diameter of 45mm (1.77")  x 1.6 =  Total pitch 72mm (2.832")  Fits 3/16 shaft  $13.00

Octura M447  Beryllium Copper prop  Diameter 47mm (1.85")  x 1.4 =  Total pitch 65.8mm (2.59")  Fits 3/16 shaft  $13.50

Octura X447  Beryllium Copper prop   Diameter 47mm (1.85")  x 1.4 =  Total pitch 65.8mm (2.59")   Fits 3/16 shaft  $13.00ea
 

TFL Props  These are very well made with all mold flashing removed and polished from the factory. Minimal balancing required.
 I am really  liking these props.

435  2 blade. Diameter of 35mm x 1.4 pitch = 49mm total pitch  (35 x 49)  Fits 4mm shaft. This is the stock prop for the Prince or Rocket.

437/3  3 blade. Diameter of 37mm x 1.4 pitch = 51.8 total pitch.  (37 x 52)  Fits 3/16 shaft.  $12.00

438    2 blade. Diameter of 38mm x 1.4pitch = 53.2 total pitch.  (38 x 53)  Fits 3/16 shaft.  $12.00

440  2 blade. Diameter of 40mm x 1.4 pitch = 56mm total pitch  (40 x 56)  Fits 3/16 shaft.  $12.00

443 Back Cut  2 blade.  Diameter of 43mm x 1.4 pitch = 60.2mm total pitch   (43 x 60)  Fits 3/16 shaft.  $12.00