Following the success of the Twin Brushless electric King of Shaves C1 34" Catamaran, comes the new Twin Brushless electric Segad C1 34" Catamaran. Featuring twin V380 2700kv air cooled outrunner motors with clamp style motor mounts, 60A Pro-Marine water cooled electronic speed controls, and the new VR3S 2.4Ghz 3 Channel transmitter with micro receiver, the C1 34" Segad is sure to be a hit at the pond. The brightly painted hull features graphics that accurately replicate the 1995 Segad Class 1 Powerboat. The twin Brushless motors propel the Electric Segad to speeds over 40mph right out of the box!
Age Rating: 14+ With Adult Supervision
Length: 34" (86.4cm)
Beam: 9.5" (24cm)
Height: 4.5" (11.4cm)
Overall Height: 6.5" (16.5cm)
Weight: 4.5 lb (2.04 kg)
Chassis: Hand-Laid Fiber Glass
Motor: (2) V380 2700kv Brushless Outrunner (1365)
ESC: (2) 60A Pro Marine Brushless ESC (1398)
Radio: Venom VR3S 3-Ch 2.4Ghz Radio Transmitter (8186)
Servos: (1) Metal Gear High Torque (VEN-1825)
Batteries: Not Included
Free Shipping in US
AMMO 28-45-2700kv This is a great upgrade over the stock motors. 28mm diameter, 45mm long, .125 shaft diameter. 50amp max , 7.4v-18.5v $60.00
380 Water Jacket Beautifully machined blue anodized aluminum. 28mm ID X 36mm long. Comes with 2 spare o-rings.
1/8 x 3mm Stainless steel 2pc collet that fits a 1/8" (3.175mm) motor shaft and 3mm flex cable. $8.00ea
Ammo Coupler Fits .125 motor shaft and stock flex cable. $7.00 ea
Wheel Collar Used as extra insurance from loosing your flex shaft and prop. Install between the motor coupler and flex tube.
4 pcs per pack with wrench included. $1.60
1/8 Stainless Steel Thrust Bearing Install between the coupler and motor to help take the load off the motor bearings. Fits 1/8 shaft and has an OD of 7/16. $5.00 each
Prop Adapter These will adapt the stock 4mm shaft to a 3/16 prop. Sold in pairs. 2 for $2.00
Programing Card For Seaking ESC's Also works on the stock esc and Turnigy esc.
32mm Stock Props These are the stock props that come with the boat. 32mm dia and pitch of 1.4 $4.80
36mm Props Diameter of 36mm and 1.4 pitch $4.80
36 X 50 (436) Diameter of 36mm x 1.4p = 50mm total pitch. Left and Right hand Fits 4mm shaft $12.00
Molds under repairBronze Prop 37mm X 52mm These are very well made. 37mm dia x 1.4p = 52mm total pitch. Fits 4mm shaft.
Bronze Props 38mm X 55mm 38mm Dia x 1.45mm pitch = 55mm total pitch. Fits a 4mm shaft.
32mm Aluminum props Cast aluminum Diameter 32mm and pitch of 1.4 $25.00 each
36mm Aluminum props Cast aluminum Diameter 36mm and pitch of 1.4 $25.00 each
32mm Pro Machined Props CNC machined for perfect balance. Has a 1.4pitch. $43.00 ea
36mm Pro Machined props Machined aluminum Diameter of 36mm and a pitch of 1.4 $43.00
Drive Dog VEN-1979 $9.50
4mm Aluminum Bullet Nut Hard anodized aluminum and looks like chrome. Has a 4mm thread. $2.00
Venom Coupler EKOS One piece per pack.
Prop Spacer VEN-1980
Venom Flex Shafts This is a pair of replacement shafts. One left hand and one right hand.
Rudder Push Rod Seals
Venom Servo Mount Aluminum construction red anodized. Comes with four 3x6mm socket head cap screws. $17.00
Venom Ball Bearing 4x7mm plain bearing. One bearing per pack.
Venom Flanged Ball Bearing 4x7 flanged bearing. One bearing per pack.
Venom Adjustable Strut Has incremented degree measure engraved from +4 degrees to 0 to -4 degrees.
Venom Teflon Liner Stock replacement liner $3.79 each
Venom Rudder 75mm rudder with 2 water pickups.
Hatch Seal Tape. This is probably the most popular tape for sealing up your hatch. Makes a nice watertight seal. Leaves no residue and will not pull your decals when removing. 1 inch wide X 100 feet long. $2.95 per roll
Venom High Torque Metal Gear Servo Operating Voltage: 4.8-6.0V. Torque: 91.88 oz/in at 4.8, 107.20 oz/in at 6V.
