KINTEC RACING
Precision Perfomance Products
Mono and Hydro
Small 55mm Turn Fins Made from .060 (1.5mm) thick aluminum, hard anodized to look like chrome. Adjustable depth and angle. Mounting brackets and all hardware included. $12.00
Medium 68mm Turn Fins Made from .060 (1.5mm) thick aluminum hard anodized to look like chrome. Adjustable depth and angle. Mounting brackets and all hardware included. $15.00
Large 92mm Turn Fins Made from .060 (1.5mm) thick aluminum, hard anodized to look like chrome. Adjustable depth and angle. Mounting brackets and all hardware included. $18.00
Carbon Fiber Turn Fins Made from .075 thick (1.9mm) approx 2 5/8 long (66mm) and 7/8 wide (22mm wide) Comes with aluminum hard anodized base with all mount screws. $15.00
Stainless Steel 2 Inch Set adjustable stainless steel fins with aluminum bracket and stainless hardware.
2 inch long (50mm) and 7/8 inch wide (22mm). $10.00
Large Type 2 Turn Fin Set Machined hard anodized aluminum with all mounting brackets and hardware included.
3 1/2 inch (89mm) long. 1 1/2 inch (38mm) at the widest. $16.00
AquaCraft Supervee Turn Fins Anodized aluminum with mounting screws. 1 3/4" (44mm) long X 1" (25mm) wide.
Starboard (Left) Port (Right)
AquaCraft Rio 51 Turn Fins Anodized aluminum. 2 3/4" (70mm) long X 1 1/4" (32mm) wide. 2 fins per pack both starboard and port. 1 bracket per pack. You need 2 brackets per boat. Fins $25.00 per pair. Brackets $7.00 each
Rion EP Turn Fin and Trim Tab Set Powder coated aluminum with mounting screws. $2.70 per pair
AquaCraft 15/18 Hydro Turn Fin Polished Increases performance and handling for .12- .18 powered sport hydros. $18.00
Length 4.4" (112mm) Width 1.71" (43.5mm) Thickness .05" (1.26mm) Mounting Screws and bracket included.
AquaCraft 15/18 Hydro Turn Fin Blue Increases performance and handling for .12- .18 powered sport hydros.
Length 4.4" (112mm) Width 1.71" (43.5mm) Thickness .05" (1.26mm) Mounting Screws and bracket included. $18.00
UL-1 2mm Aquacraft Fin AQUB9539 Aquacrafts upgrade fin is 2mm thick and comes with the stock mounting bracket and all hardware needed for installation.
UL-1 Straight Turn Fin Made from .090 thick 7075 High strength aluminum. Not only thicker but much stronger material then stock. The fin is straight for less lift but still tune able to end users liking. $17.00 ea Made in USA
Super Duty Turn Fin Bracket Made from super strong 7075 aluminum anodized black. 42% thicker then the stock AquaCraft unit. Fits all AquaCraft 15/18 fins. Guaranteed not to flex. Makes dialing the boat in easier even with the stock fin. Also has a larger foot print against the hull for better support. Even if you don't install a third bolt in the hull just epoxy this unit down for more strength.
Another quality Kintec Racing product. Made in USA $10.00ea
Internal Fin Bracket / Sponson Doubler Made from 3/16 (5mm) thick aluminum with threaded 3mm holes. Can be used with stock Aquacraft 15/18 bracket or Kintec Racing bracket. Makes the bracket rock solid. Comes with extra long stainless screws. $15.00 ea
Aquacraft Stainless Turn Fin w/ Bracket Miss Vegas Deuce powder coated stainless steel fin w/ bracket and screws $8.00
