Venom "King of Shaves" RTR Electric Power 34"     $445.00


Venom’s new electric King of Shaves, Class 1, 34 inch scale racing catamaran, officially licensed by King of Shaves® and accurately replicates the 2006-2007 King of Shaves® Class 1 Powerboat. The Venom electric C1 racing boat King of Shaves has many high performance features, including a scale fiberglass composite catamaran hull combined with twin Venom 60A Pro Marine brushless speed controls and dual Venom V380 Marine motors turning 2880KV each. This powerful combination turns twin glass filled nylon counter rotating propellers through CNC machined fully adjustable Arneson style drives to rocket the King to speeds in excess of 40mph!

Features:

• Fiberglass Composite Hull with scale “King of Shaves®” graphics
• Secured top hatch with pin and Neodymium magnets
• Two water cooled Venom 60A Pro Marine Brushless Speed Controls
• Two water cooled Venom V380 2880KV Brushless Motors with 4mm shafts
• Two Arneson style CNC machined aluminum fully adjustable drives with ball bearings
• CNC machined aluminum motor mounts
• Aluminum ESC and servo mounts
• Composite nylon counter rotating propellers
• Laser cut and sealed plywood battery tray with integrated receiver mount
• VR3T Digital FM transmitter and receiver
• Laser cut and sealed plywood boat stand

Specifications:

Age Rating: 14+ With Adult Supervision
Length: 34" (86.4cm)
Beam: 9.5" (24cm)
Height: 4.5" (11.4cm)
Overall Height: 6.5" (16.5cm)
Weight: 4.5 lb (2.04 kg)
Chassis: Hand-Laid Fiber Glass
Motor or Engine: Brushless, Electric Direct Drive
Radio: Venom VR3T 3-Ch FM Radio Transmitter
Servos: (1) Metal Gear High Torque (VEN-1825)
Batteries: Not Included

AMMO 28-45-2700kv   This is a great upgrade over the stock motors. 28mm diameter, 45mm long, .125 shaft diameter.
50amp max ,  7.4v-18.5v

380 Water Jacket    Beautifully machined blue anodized aluminum.  28mm ID X 36mm long. Comes with 2 spare o-rings.
 

28-58  2881KV XL Replacement Motor w/ Water Jacket     28mm diameter x 58mm long.   1/8 shaft.    9.6 volt- 14.4volt 
max amps 38a   $45.00
 

Ammo Coupler     Fits .125 motor shaft and stock flex cable.   $7.00 ea
 

Wheel Collar  Used as extra insurance from loosing your flex shaft and prop. Install between the motor coupler and flex tube.
4 pcs per pack with wrench included.  $1.60

1/8 Stainless Steel Thrust Bearing  Install between the coupler and motor to help take the load off the motor bearings. Fits 1/8 shaft and has an OD of 7/16.   $5.00 each

Prop Adapter  These will adapt the stock 4mm shaft to a 3/16 prop.  Sold in pairs.  2 for $2.00

Programing Card For Seaking ESC's    Also works on the stock esc and Turnigy esc.
   

32mm Stock Props      These are the stock props that come with the boat.      32mm dia and pitch of 1.4
            

rotation

Ven-1981 LXXSN9 $3.80 Ven-1982 CR LXXSP0 $3.80

36mm Props     Diameter of 36mm and 1.4 pitch
                 

rotation

VEN-1983 LXXSP1 $3.80 VEN-1984 CR LXXSP2 $3.80

Bronze Prop 37mm X 52mm  These are very well made. 37mm dia x 1.4p = 52mm total pitch. Fits 4mm shaft.

Rotation

37 x 52 Left $12.00 37 x 52 Right $12.00

Bronze Props 38mm X 55mm    38mm Dia x 1.45mm pitch = 55mm total pitch.  Fits a 4mm shaft.

Rotation

38 x 55 Left $12.00 38 x 55 Right $12.00

36mm Aluminum props  Cast aluminum  Diameter 36mm and pitch of 1.4   $16.00 each
   

Rotation

VEN-1995 Right LXYLA8 $16.00 VEN-1996 Left LXYLA9 $16.00

32mm Pro Machined Props  CNC machined for perfect balance. Has a 1.4pitch. $35.00 ea
  

rotation

VEN-1989 Right LXYLA2 $35.00 VEN-1990 Left LXYLA3 $35.00

36mm Pro Machined props  Machined aluminum  Diameter of 36mm and a pitch of 1.4
   

rotation

VEN-1991 RT LXYLA4 $35.00 VEN-1992 LT LXYLA5 $35.00

Drive Dog  VEN-1979   $9.50
 

Bullet Nut  Hard anodized aluminum. Looks like chrome. $2.00                         

Venom Coupler EKOS    One piece per pack.
 

Prop Spacer  VEN-1980

Venom Flex Shafts  This is a pair of replacement shafts. One left hand and one right hand.

Rudder Push Rod Seals 
  

Venom Servo Mount  Aluminum construction red anodized. Comes with four 3x6mm socket head cap screws.  $17.00

Venom Ball Bearing  4x7mm  plain bearing. One bearing per pack.
  

Venom Flanged Ball Bearing  4x7 flanged bearing. One bearing per pack.
 

Venom Adjustable Strut  Has incremented degree measure engraved from +4 degrees to 0 to -4 degrees.

Venom Teflon Liner  Stock replacement liner  $3.79 each

Venom Rudder  75mm rudder with 2 water pickups.
 

Hatch Seal Tape. This is probably the most popular tape for sealing up your hatch. Makes a nice watertight seal. Leaves no residue and will not pull your decals when removing.   1 inch wide X 100 feet long.      $2.95 per roll
 

Venom High Torque Metal Gear Servo  Operating Voltage: 4.8-6.0V.    Torque: 91.88 oz/in at 4.8,  107.20 oz/in at 6V.
 

Venom Hatch EKOS      VEN-1966      $35.00